Saturday, 22 August 2015

Frameless Glass Showers

"Frameless" glass showers have become the new standard in elegant glass installations. I recently familiarized myself with some of the the techniques and options available for several installations that I was contracted to do.

With a variety of engineered "glass clamps", hinges, stabilizing hardware and tempered glass, a wide variety of designs can be realized. These installations allow the tile, stone and etched glass to be enjoyed from inside and outside the shower area.

I recently installed glass in three showers (two with no etching on the glass), using these techniques. One is a "neo-angle" design (a corner installation with the door set at a 45 degree angle to the walls) with a steam option that required floor to ceiling glass.

The second installation used a newly designed post system that stabilizes the glass panels where one edge doesn't reach the ceiling or wall. A frameless shower door can then be hinged off a stabilized panel, making a visually clean and structurally sound installation.

Here's a detail photo of the stabilizing posts:

While those two installations did not have any etching on the glass, I did exercise my affection for Great Blue Herons once again, in the third installation.

The pebbled stone floor works well with the heron, reeds and water design, the etching contrasting well with the dark tiles on the walls.

The reeds and feathers were delicately etched on the surface of the tempered glass using the sandblast etching process, creating a layerd effect. A soft surface texture was achieved by using a fine abrasive, resulting in a permanent image that is easy to keep clean.

The new hardware available for frameless glass showers allows me more options to offer clients, expanding on the techniques I have learned over twenty-five years of creating glass designs.


1 comment: